Wooden Door Decoration Acceptance Method

The door is the first impression of home at the entrance of the house, which determines the decoration level of the house. I often hear someone around me talk about the protégé gold, which means the door affects the home's Feng Shui fortune. Therefore, the decoration process is particularly critical to the acceptance of the door.

When the customized wooden door is delivered to your home, you need to check the goods first. At this time, you do not need to unpack it, but just to see whether the packaging is intact, whether the packing box has moisture problems, whether bulky goods packing box has any bumps in the corners and whether the goods forbidden to be pressed are squeezed. If there is no problem, confirm the number of pieces to be delivered and sign the delivery note with the delivery master, and then wait for the installation master to come and install.

The installer will open the package at the installation site for detailed inspection. If the goods are found to be missing or damaged, he will be responsible for contacting the company for replenishment or replacement and repair. If there are scratches or bumps, the paint can be repaired on-site. It is necessary to apply for a return to the factory for repair and treatment. The installer will also measure the size of all wooden door leaf sleeves and the size of the door hole to ensure whether the size is correct or not. The installation will start when there is no problem.

When the installation master unpacks the goods and inspects the goods, we must check by ourselves to see if the color, the style, the glass and hardware are correct, and if the door leaf is tested by hand. If the weight of the door leaf is almost 60-80 kg, the filling material is more solid, and if it feels very light, then pay attention to the door leaf filling must be problematic. Secondly, make a fist and knock on the door leaf from top to bottom and from left to right. If the sound is crisp, uniform and thick, there is no problem. If the knocking sound is hollow, pay attention to checking the quality of the products. Once again, carefully check whether the front and back sides and corners of the door leaf are visible, and check whether the material of the door cover plate and the two ends of the cover line are the same as the material purchased under the contract and whether there are hidden cracks and deformations. Finally, you need to take a deep breath and smell whether the product has a strong pungent odor after unpacking. If there is a strong smell, then pay attention to the environmental protection issues it may cause and maintain long-term ventilation after installation.

During the installation process, the owner also needs to pay attention to whether the door leaf is processed and cut on-site. If there is a cutting on the top or bottom of the door leaf on site, it must be rejected, because once the door leaf is cut, it will affect the appearance and moisture resistance during use. There must be some problems of the original customized size of the wooden door. Look at the size of the glue joint between the door cover and the wall. The standard of the glue joint is 10-15mm when the door is vertical. The glue joint should not be too large so that to make sure the styrofoam and filler fill the glue between the door cover and the wall, with 3-5mm left and right door seams, 3mm upper door seams and 5-7mm lower door seams. If it is a bathroom door, the lower door seam should be 8-10mm. Remind the installer that all door panels and lines on the ground should be treated with waterproof glue, and the panels and lines of the window cover next to the countertop and the inner corner of the wall need to be treated with waterproof glue. The sideline of the bathroom door and wall gap should adopt waterproof glue treatment, and the top of the side door cover in the bathroom needs to be moisture-proof.

After installing the wooden door and cladding, the installer will usually ask the owner to accept it. You need to pay attention to whether there are any visible bumps or paint when accepting, because the installation process will cause small bumps, cracks and deformation, remember to check the anti-collision strips of the wooden door. Try opening and closing the door, and check the lock and see if the door leaf and the ground will be scratched. If there is any problem, you’d better propose and determine the solution on the spot.